Soluble Molybdenum Compound and Sulphur
Containing EP Additives Combinations: Synergistic and Adverse on
Antifriction and Antiwear Characteristics |
R.Sarin, A.K. Gupta, V.Martin, A.V. Sereshbabu, A.K.Misra, A.K.Bhatnagar
(India Oil Corporation) |
India |
Surface Reaction Behavior of
Isogeometrical Phosphorus Compounds |
R.Schumacher, H. Zinke (Ciba-Geigy AG)
D.Landolt, H.J. Mathieu (Swiss Federal Institute of Technology) |
Switzerland |
Fuel Economy Engine Oils Via Friction
Modifiers |
Larry L.K.Kuo, S.T.Chang, S.K.Hsieh,
C.Y.Chu (Chines Petroleum Corporation) |
Taiwan |
Determination of Friction-Reducting and
Antiwear Characteristics of Lubricating Engine Oils Compounded with
Friction Modifiers |
Chao-Yuan Tung (Ming-Hsin Institute of
Technology) S.K.Hsieh, G.S.Huang, L.Kuo (Chines Petroleum Corporation) |
Taiwan |
Fuel Efficiency of SAE 5W-20 Friction
Modified Gasoline Engine Oil |
Kohkichi Hoshino, Hiromi Kawal, Kenyu
Akiyama (Toyota Motor Corporation) |
Japan |
Einglaettung der Oberflaechenrauhigkeit
ohne Abrieb mit Hilfe eines neuen Schmierstoffadditives |
Dipl.-Ing. H.Bachmeier |
Germany |
Fuel Efficiency of SAE 5W-20 Friction
Modified Gasoline Engine Oil |
Kohkichi Hoshino, Hiromi Kawal, Kenyu
Akiyama (Totyota Motor Corportation) |
Japan |
Einsatz der SRV-Geraete bei Ciby-Geigy |
H.-P.Gutknecht (Ciba-Geigy AG) |
Switzerland |
Improvement of Lubrication Breakdown
Behaviour by Isogeometrical Phospoous Compounds |
R.Schumacher, H.Zinke (Ciba-Geigy)
D.Landolt, H.J.Mathieu (Wsiss Federal Inst. Of Technology) |
Switzerland |
SRV Testbericht ueber
Additive-Grundlagenforschung |
R.Kaller (BMW), J.Ebrecht 9Optimol
Instruments Pruftechnik GmbH) |
Germany |
SRV Test report on fundamental research on
additives |
R.Kaller (BMW), J.Ebrecht 9Optimol
Instruments Pruftechnik GmbH) |
Germany |
Tribological Investigation of Piston
Ring-Cylinder Liner in Presence of Oil Organomolybdenum Additives |
Ruijun Zhang, Shengua Li, Yuanshen Jin
(Tsinghua University) |
China |
Competitive Surface Interations of
Critical Additives Interacted with Piston Ring/Cylinder Liner Components
Under Lubricated Running-In Conditions |
Yuansheng Jin Ruijun Zhang, Shengua Li,
(Tsinghua University) |
China |
MoS2 und SnS2 als Festschmierstoffe im
Vergleich - Zinndisulfid-ein neues Additiv im Schmierstoffbereich -
Vergleichende Untersuchungen zur Leistungsfaehigkeit von zinndisulfid
und Molybdaensulfid |
Dr. Matthias Weiss (Goldschmidt TIB GmbH),
Dipl.-Ing (FH) Markus Grebe, Prof. Dr. Ing. Paul Feinle (Fachhochschule
Mannheim Institut Fur Tribologie) |
German |
SRV Testbericht
Uueber Motoroelzusaetze |
J. Ebrecht (Optimol Instruments
Pruftechnik GmbH) |
Germany |
SRV test report engine oil additives |
J. Ebrecht (Optimol Instruments
Pruftechnik GmbH) |
Germany |
Reference oils for diesel and gasoline
engines |
Dr. R. Schumacher (Ciba-Geigy) |
Switzerland |
Simulation der Vickers-Pumpe auf dem
SRV∝-Testsystem |
J. Ebrecht (Optimol Instrument Pruftechnik
GmbH |
Germany |
oil esamination on SRV test equipment
(Vickers pump) |
J. Ebrecht (Optimol Instrument Pruftechnik
GmbH |
Germany |
Fretting wear with
powertrain lubricants |
Derek A. Law, Carleton N. Rowe (Mobil
Research and Development) |
USA |
Development of a new Technique to
Characterize the Tribological Behaviour of the Steel-Oil Die -System |
M.Vermeulen (OCAS) |
Belgium |
Friction coefficient of 0.05-No longer an
utopian dream for aqueous systems |
S.Eskildsen, D. Larsen, H.Reitz, E.Bienk,
C.Straede (DTI Tribology Centre) |
Denmark |
Die Kaltumformung phosphatierter
Stahlrohre durch Gleitziehen |
K.D.Nittel (Chemetall) |
Germany |
Der Einfluss von Schmierstoffadditiven auf
das Formen von Blech |
Renta Eskola J.Kumpulainen (Helsinki
University) A.Niemi (Neste Oy) |
Finland |
Influence of Lubricant Additives on Sheet
Metal Forming |
Renta Eskola J.Kumpulainen (Helsinki
University) A.Niemi (Neste Oy) |
Finland |
Development of a Metal-Stable
Semi-Synthetic Lubricnat for Cold Rolling of Steel |
S.N.Singh (Steel Authority of India)
S.Mahanti, A.K.Bhatta, R.N.Biswas, J.Bhatia (Balmer Lawrie) |
India |
New Testing Methods
for Used Gear Oils |
J. Ebrecht (Optimol Instruments
Pruftechnik GmbH) |
Germany |
Preventing Pitting by Ion Nitriding on
Automotive Timing Gear Train |
G.Mannone, R.Adamo P.Iulita (Fiat Auto
SpA) |
Italy |
SRV Testbericht Simulierung des Einsatzes
verschiedener Getriebeoele in Schneckengetrieben |
J. Ebrecht (Optimol Instruments
Pruftechnik GmbH) |
Germany |
SRV test report :Simulating the
application of defferent gear aoils in worm gears |
J. Ebrecht (Optimol Instruments
Pruftechnik GmbH) |
Germany |
|
|
|
A new method of reducing test ezpenditures
in the selection of oils for manual gearboxes |
H.Noemayr (BMW) |
Germany |
Evaluation of
open-gear lubricants on a laboratory test-rig |
P.L.de Vaal (University Pretoria) |
South Africa |
The development of a user specification
for open-gear lubricants |
P.L.de Vaal (University Pretoria) |
South Africa |
New Biodegradable Universal Tractor
Transmission Oil based on Rapeseed Oil |
J.Vizintin, B.Kran (University of
Ljubljana) |
Slovenia |
Scuffing Load Capacity of Rapeseed Based
Oils |
A.Arnsek (Petrol d.d) J.Vizintin
(University of Ljubljana) |
Slovenia |
Synergistic lubricating effects of borate
ester with heterocyclic compound |
Guanquiu Shen, Zhi Zheng, Yong Wan,
yiangdong Xu, Lili Cao, Qixia Yue, Tianjian Sun, Airou Liu (Dept. Of
Chemistry, Tshingua Univerity) (Tianrun Chemical Co.) (Dept. Of
Chemistry, Xuchang Normal College ) |
China |
Working mechanisms of additives in belt
type CVT contact area |
T.Sato (Tonen Corp.) Y.Yamamoto (Kyushu
University) |
Japan |
Schmierstoffvorauswahl fuer Gleichlaufgelenke mit dem SRV-Geraet |
Dr.Riewe, Joerg Langbein (Mercedes Benz) |
Germany |
Lubricating grease for a plunging type
constant velocity joint in Japan |
Ko Hatakeyama (Kyodo Yushi Co. Ltd) |
Japan |
Improving the correlation between field
and test machine conditions by using dynamic test Programmes for the
development of CV joint greases |
J.Ebrecht (Optimol Instruments
Prueftechnik GmbH) |
Germany |
Applications of dynamic test programs for
the development of CV joint greases |
J. Dickey (STLE Meeting 1996) |
USA |
Schwingungsverschleiss von Gleitlacken |
Dr. W.Sessler (WIM) |
Germany |
Schwingungsverschleiss von
MetallKohlenstoffschichten |
Dr. W.Sessler (WIM) |
Germany |
Effect of carrier base solvency in
greases:microstructure, properies and performances |
P.Vergne, N.Truong-Dinh, I.Couronne,
L.Ponsonnet, D.Girodin |
France |
Developing a New Gerneration of Low
Friction Greases with Optimol SRV Test System |
M.A.Adams (Mid-Michigan Testing) |
USA |
SRV
Material Test Bearing/Clutch Spring |
J.Ebrecht (Optimol Instruments
Prueftechnik GmbH) |
Germany |
Development of Journal Bearings for Lift
Mechanism in Wheel Loaders; SRV Testing with Combinations of Bearing
Materials and Lubricating Greases |
T.Dahlen (VME Industries) A.Loden (FFV
Materialteknik) |
Sweden |
Fretting Wear Performance of Glass,
Carbon, and Aramid Fibre/Epoxy and Peek Composites |
O.Jacobs, K.Friedrich (TU Hamburg)
K.Schulte (Institute of Materials Science)
G.Marom (Uni) H.D.Wagner (The Weizman
Inst.) |
Germany
Israel |
Systematic Fretting Wear and Fretting
Fatigue Studies Carbon Fibre / Epoxy Laminates |
O.Jacobs, K.Friedrich (TU Hamburg)
K.Schulte (Institute of Materials Science) |
Germany |
Verschleiss und Reibermuedung ("Fretting
Fatigue") von Kohlenstoffaser/Epoxid-Laminate |
O.Jacobs, K.Friedrich (TU Hamburg)
K.Schulte (Institute of Materials Science) |
Germany |
Fretting Wear and Fretting Fatigue
Performance of Carbon Fibre/Epoxy Resing Lamintes |
O.Jacobs, K.Friedrich (TU Hamburg)
K.Schulte (Institute of Materials Science) |
Germany |
A Study of the Influence of Steam
Treatment on the Tribological Behaviour of Steel Specimens |
A.Ferrari,V.Veronesi (IBM) G.C. Gazzaniga
(Assoreni) |
Italy |
A study of the Tribological Behaviour of
Perfluoro-Polyethers |
E.Cosmacini, Stazione (Sperimental Olii e
Grassi) V.Veronesi (IBM) |
Italy |
Untersuchung reibungs- und
verschleissmindernder Kunststoffmaterialien in Verbindung mit Stahl und
Schmierstoff |
Optimol Instruments |
Germany |
Examination of wear and friction reducing
synthetic materials in connection with steel and lubricant |
Optimol Instruments |
Germany |
SRV Testbericht ueber Motoreneinlaufoele
mit Originalpruefkoerpern Kolbenring/Zylinderwand |
Optimol Instruments |
Germany |
SRV test report on running in engine oils
with original specimens piston ring/cylinder wall |
Optimol Instruments |
Germany |
Wear behaviour of titaium coating
combinations at elevated temperatures |
Dr. Thoma (MTU Muenchen) |
Germany |
Effect of Molydenum Dithiocarbamate on
Friction and Wear Properties between Aluminium Alloy and Steel |
Katsuya Arai (Tonen Corp), Juji Yamamoto
(Kyushu University Fukuoka) |
Japan |
Tribological behaviour of tungsten doped
i-carbon layers deposited on SiSiC under sliding and fretting conditions
up to 250” |
D.Klaffke, R.Waesche (BAM Berlin) |
Germany |
Entwicklung eines Prueflaufs am SRV-Geraet
zur Vorauswahl von Synchronisationsbelaegen(Diplomarbeit) |
Erwin Kerscher |
Germany |
Schwingungsverschleiss von
fluoridinfiltriertem Aluminiumoxid |
D.Klaffke, R.Waesche (BAM Berlin) |
Germany |
Friction and Wear of HPSN Bearing
Materials |
M.F.Wani, B.Prakash, P.K. Das, S.S.Raza,
J.Mukerji, (Central Glass & ceramic Research Institute) |
India |
Schwingungsverschleissuntersuchungen als
begleitende Massnahme zur weiterentwicklung keramischer Werkstoffe |
D.Klaffke, R.Waesche (BAM Berlin) |
Germany |
Effects of Surrounding Atmosphere on the
Formation of Carbon Films at 450” |
C.Zhou, Y.Jin, S.Wen (National Tribology
Laboratory, Tsinghua University) |
China |
Reibverschleiss-Widerstand und
Reib-Ermuedung von Hybrid-Verbundwerkstoffen |
Prof.Dr.K.Friedrich (TU Hamburg) |
Germany |
Einfluss unterschiedlicher Fuellstoffe und
Faserarten auf das Verschleissverhalten von Polyamid-46 |
R.Reinicke, I.Hoffmann, K.Friedrich |
Germany |
Schwingungsverschleiss harter Schichten
bei Oelschmierung |
Dr.W.Sessler (WIM) |
Germany |
Antifriction Behavior of Cr2O3 Coated
Cylinder Liner and Mo-Coated Piston Ring for Adiabtic Diesel Enmgine at
High Temperature |
J.Yuansheng, L.Yanfei, M.xiahua, X.Weimin
(Tsinghua University Beijing) |
China |
The Tribological Behavior of Various
Plasma Sprayed Coatings Against Cast Iron |
J.Yuansheng, W.Huadong(Beijing)
A.R.Nicoll, G.Barbezat (Plasma-Technik AG) |
China
Switzerland |
Graphite Powder and other Solids in
Lubrication |
F.G.Fischer, A.D.Cron R.G.Huber (Lonza
Ltd) |
Switzerland |
Graphite and Molybdenum Disulphide
Synergisms |
F.G.Fischer, A.D.Cron R.G.Huber (Lonza
Ltd) |
Switzerland |
Abrasion, erosion and sucuffing resistance
of carbide and oxide ceramic thermal sprayed coatings for different
applications |
G.Barbezat, A.R.Nicoll (Plasma-Technik AG)
A.Sickinger (Electro Plasma Inc) |
Switzerland
USA |
Friction and wear of a plasma sprayed
Al2O3-40%ZrO2-cast iron system |
Huadong Wu, Beijing Yuansheng Jin
(Tsinghua University Beijing)
A.R.Nicoll, G.Barbezat (Plasma-Technik AG) |
China
Switzerland |
Preventing Pitting by Ion Nitriding on
Automotive Timing Gear Train |
G.Mannone, R.Adamo, P.Iulita (Fiat Auto) |
Italy |
Beitrag zum tribologischen Verhalten von
mikrolegierten Baustaehlen in Abhaengigkeit vom behandlungszustand |
F.A.Gerbig, K.Hellmann, H.Albrecht, J.
Thiem (Schmalkalden) Wittauer, B.Koellner (Schmerbach) F.Faulhaber
(Zella-Mehlis) |
Germany |
Korrosionsschutz
von luftfahrtrelevanten werkstoffen durch Ionenstrahlverfahren |
Dr.G.Arnolds-Mayer Dr.R.Holbein (Dornier
Lufthahrt) |
Germany |
Korrosion- und Verschleissschutz fuer
luftfahrtrelevante Werkstoffe durch die Hochvakuumtechnologie |
Dr.G.Arnolds-Mayer Dr.R.Holbein (Dornier
Lufthahrt) |
Germany |
Tribological evaluation of Diamond like
Carbon Coatings under Abrasive and Sliding Test Conditions |
J.Meneve, K.Verkammen, H.Haefke, Y.Gerbig,
E.Pflueger (Materials Technology Centre, VITO) CSEM |
Belgium
Switzerland |
Characterisation of W-S-C/N Coatings by
Reciprocating Ball on Ddisc Sliding |
Ana Nossa, Albano Cavaleiro (Dep. Eng.
Mecanica) |
Portugal |
Zusammenhang von mechanischen
Eigenschaften und mechanischen Eigenschaften und Verschleissverhalten
von kurzfaserverstaerktem Polyamid-46 |
R.Reinicke, J.Hoffmann, K.Friedrich |
Germany |
Wear properties of thermoplastic polyimide
based composites under fretting condition |
K.Ohira, M.Egami (NTN Corporation) |
Japan |
High Wear
Resistance at High Temperatures by a Co + Cr2O3 Electrodeposited
Composite Coating |
M.Thoma (MTU Muechen) |
Germany |
Schaufeln und Scheiben in
Gasturbinen-Schwingungsver-Schleissverhalten keramischer Werkstoffe bei
hohen Temperaturen |
D.Klaffke, T.Carsten (BAM, Berlin), Prof.
H.G.Feller (VDI Verlag) |
Germany |
Influence of grain refinement on the high
temperature fretting behaviour of IN738LC |
D.Klaffke, T.Carsten (BAM, Berlin)
A.Banerji (Techn. Uni.Berlin) |
Germany |
Werkstoffuntersuchungen mit
monokristalliner Diamantkalotte |
Iliuc, (Universitaet Bukarest)
M.Jokl (Ingenieurbuero) |
Romania
Germany |
An investigation of fretting behavior of
ion-plated TiN, magnetron-sputtered MoS2 and their composite coatings |
Guizhen Xu, Jiajun Liu, Xiaohua Ma
(Tsinghua University, Beijing), Zhongrong Zhou (Southwest Jiaotong
University, Chengdu) |
China |
Schwingungsverschleiss von
fluoridinfiltriertem Aluminiumoxid |
|
Germany |
High temperature friction and wear
characteristics of various coating materials for steam valve spindle
application |
B.S.Mann, Braham Prakash (BHEL, ITMMEC) |
India |
Substitution of
Inexpensive Bench Test for the FZG scuffing Test-Part I : Calculation;
Part II: Oil Tests |
Van de Velde, P.Willen (University Gent),
Van Geetruyen (Texaco) |
Belgie |
Scuffing Load Capacity of Rapeseed Based
Oils |
A.ARSEK (Petrol d.d.) Ljubljana J.VIZINTIN
(Univ. Ljubljana) |
|
Optimol SRV Material -Lubricant Tester |
D.P.Tobin (BHP Steel) |
Australia |
Influence of test parameters on
Tribological Results - Synthesis from Round Robin Tests |
Dr. M.Woydt (BAM) |
Germany |
Tribometrie Messen mech. Groessen mit
Dehnungsmessstreifen (DMS) sowie DMS- und induktiven Aufnehmern
Tribologische Pruefung von Schmierstoffen im Mischreibungsgebiet
Tribologie bei der Zahnradpruefung Dynamisches Messen tribologischer
Vorgaenge |
H.Juenemann (Tribotechnik Ingenieurbuero),
M.Laible (Technische Info.u.Dokumentation), M.Laukotka (Deutsche Shell
AG), Dr.-Ing. K. Michaelis (TU Muenchen), H.Weber (Optimol Instruments
Prueftechnik GmbH) |
Germany |
Eine Untersuchung des Phaenomens Reibung
mittels des SRV-Pruefgeraetes, Reibkorrosion, Festkoerperschmierstoffe
und Oele |
H.Taguchi, H.Aoki, H.Shiga |
Japan |
A Study on Phenomena of Friction by SRV
Tester, on Fretting Corrosion, Solid Film Lubricant and Oil |
H.Taguchi, H.Aoki, H.Shiga |
Japan |
Systematische Betrachtungen tribologischer
Pruefverfahren |
H.Juenemann (Tribotechnik Ingenieurbuero) |
Germany |
New ASTM and DIN Methods for Measuring
Tribological Properties Using the SRV Test Instrument |
James R.Dickey |
USA |
Applications and Advantages of Dynamic
Tribology Testing |
Johannes Ebrecht (Optimol Instruments
Prueftechnik GmbH) James R.
Dickey |
Germany
USA |
Engineers are continuously searching for
new engine materials in an effort to improve ICE efficiency. As a
result, new and inventive equipment and techniques to test such
materials have had to be developed |
Dr.M.Woydt (BAM) |
Germany |
Unusual Lift by Shearing Mesogenic Fluids |
R.Eidenschink (Nematel), G.Konrath,
H.Kretzmann 9Fraunhofer-institut Werkstoffm) |
Germany |
Qualitaetssicherung und Entwicklung mit
einer dynamischen Modellpruefmaschine |
Johannes Ebrecht (Optimol Instruments
Prueftechnik GmbH) |
Germany |
Usura, attrito e lubrificazion:
Fenomenologia, Diagnosi e Rimedi |
R.Adamo (Fiat Auto) |
Italy |
Einfluss der Reinigungsmedien auf
tribologische Kenngroessen |
Dr.M.Woydt (BAM) |
Germany |
Use of equations for wear volume
determination in fretting experiments |
M.Kalin, J.Vizintin (Univ.of Ljubljana) |
|
Bestimmung von Reibung-, Verschleiss- und
Druckaufnahmeeigenschaften von Schmierstoffen mittels Testlauf auf
tribologischer Maschine |
(IVECO) |
Italy |
Caratteristiche antiattrito, antiusura e
di resistenza ai carichi dei lubrificanti mediante prove su tribometro |
(IVECO) |
Italy |
Pruefung SRV Stufentest mit dem Kugel-
Platten- System C1StV304 |
(Deutsche Bundesbahn) |
Germany |